Installation Preparations / Wooden-Liner Pool; Pump Kit Installation / Concrete-Tile Pool - schmalenberger fluvo C2 rondo Instrucciones De Operación

4.4

Installation preparations / Wooden-liner pool

fig. 12: Boring diagram
4.5

Pump kit Installation / Concrete-tile pool

fig. 13
52
8309
8426
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
OPERATING INSTRUCTIONS
Tailor the installation kit:
Cut the cavity Ø 260 and the mounting
holes Ø 12 into the pool wall.
Warning! Risk of damage!
The hold-ring (68) must be used as a
template.
Take note of the asymmetrical position of
the holes!
10 Suction housing
20 Installation kit
26 Nut
27 Distance washer
32 Clamp gasket
Mount the suction housing (10) with the
clamp gasket (32) and the nuts (26) and
washers (27) on the installation kit (20).
The sealing contact faces must be clean
and smooth.
Warning!
The suction housing (10) must be
mounted so that the connection for the
membrane switch is at the top.
C2 rondo
Version: 27200 - D