Pump Kit Installation / Concrete-Liner Pool; Installation Kit And Pump Kit Installation / Pre-Fabricated Pool - schmalenberger fluvo C2 rondo Instrucciones De Operación

OPERATING INSTRUCTIONS
4.6

Pump kit Installation / Concrete-liner pool

fig. 14
Hang in the liner, mount with the clamp ring (30) and the screws (74) to the installation kit
(20). The first gasket (39) should be between the installation kit (20) and liner, the second
gasket (32) between the installation kit (20) and suction housing (84). Pierce the liner on
the clamp ring (30) for the eight suction housing stay bolts.
Warning!
The suction housing (84) must be mounted so that the connection for the
membrane switch is at the top.
4.7

Installation kit and Pump kit Installation / Pre-fabricated pool

fig. 15
J Pool wall
26 Nut
27 Distance washer
30 Clamp ring
C2 rondo
Version: 27200 - D
20
26
27
30
32
39.1
74
84
8427
8428
fig. 16: Detail from fig. 15
39
62
83
84
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
Installation kit
Nut
Distance washer
Clamp ring
Clamp gasket
Clamp gasket
Screw
Suction housing
Clamp gasket
Hold-ring
Distance washer
Housing
8429
53