Installing The Switchgear Cabinet; Non-Return Air Valve Installation - schmalenberger fluvo C2 rondo Instrucciones De Operación

OPERATING INSTRUCTIONS
4.9

Installing the switchgear cabinet

fig. 19
4.10

Non-return air valve installation

fig. 20
Warning!
To position the non-return air valve also please observe the information under
chapter 4.1.
C2 rondo
Version: 27200 - D
K
02
31
Mount the switchgear cabinet (02) as
close as possible to the installation kit.
Also please observe the instructions in
chapter 4.
Fix the switching tube (31) onto the
nipple in the protective hose (K).
Warning!
Be careful not to put a kink in the
8432
switching tube and keep it as short as
possible, maximum length 8 m.
L
28
29
52
56
Fasten the non-return air valve with the
fixing bracket (56) to the pool wall or
similar. In the case of a ground level
overflow, place the non-return air valve in
the duct, see detail "X".
8433
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
Protective hose
Switchgear cabinet
Switching tube
Air hose
Non-return air valve
Air line hose tail
Air pipe clamp
Fixing bracket
55