Assembly Instructions; Important Instructions; Furniture Programme - NEFF E 3461 Serie Instrucciones Para El Uso Y El Montaje

For the installer and kitchen
expert!
Important installation notes:
Proberly dispose of packaging
materials.
Do not use oven door handle for
transporting or handling the unit during
installation.
WARNING: Connection and first start of
the appliance may only be performed by
an authorised specialist.
Connection must be made using an
H05RR-F 3 x 1.5 mains connection
cable.
Rated consumption, rated voltage
and type no. of the appliance:
See appliance nameplate behind the
oven door to the left beneath the side
edge of the oven.
The unit's nameplate is located at on
the right sidewall of the unit.
Electrical safety of the appliance can
be ensured only if the equipement earth
in the building installation has been
installed according to regulations.
Always make sure that the appliance is
currentless during assembly and
repairs.
Connectable built-in hob:
M-AD11-N; M-AD13-N.
Heat up the oven before it is installed.

Assembly Instructions

Furniture programmes
Cooker conversion cabinets from virtually
all lines of kitchen furniture are suitable for
installing the built-in cooker, However, the
veneers or plastic laminates on the
conversion cabinets must be applied with
heat-resistant cement (90 C). If plastic
laminates or cement are not sufficiently
heat-resistant, warping, bubbling or
detachment of the finish may result.
WARNING: The appliance may be
installed with a high cabinet or a high
wall only on one side of it. On the
respective opposite side, the height of
an adjacent piece of furnishing may not
exceed the height of the working
surface in which the hob is installed.
The distance between the high wall on
the side of the hob and the rear wall
must comply with the assembly
instructions for the build-in hob. Observe
the protection class for heat exposure
as stated in the assembly instructions.
55