Easyclean; System (Oven Cleaning System) - NEFF E 3461 Serie Instrucciones Para El Uso Y El Montaje

EasyClean

® System:
The oven cleaning function featured in your
oven is intended to help you keep your
oven neat and tidy. An amount of cleaning
solution is vaporised automatically. The
combined effects of heat and steam soften
the soil deposits on the oven wall enamel
and facilitate their removal.
Caution:
Use this function only after the oven has
completely cooled (room temperature).
Use normal water only, and no distilled
water.
Activate oven cleaning:
1. Remove the baking sheet and the
universal baking pan from the oven. The
baking grill may remain in the oven.
2. Pour approx. 400 ml of water mixed
with a little dishwashing detergent into
the floor pan of the oven cavity.
In the case of heavy soil build-up, you
may wish to allow the cleaning solution
to soak in for a while before you activate
the cleaning function.
3. Close the oven door.
4. Turn the function selector to the
position. The oven cleaning and the
oven temperature control lamp are
illuminated. After the initial heating time
(approx. 4 minutes) the oven
temperature control lamp extinguishes.
After a further 17 minutes the program
cycle is completed. A buzzer sounds.
Switching the oven OFF:
Turn the function selector to the 0 position.
The oven cleaning control lamp
extinguishes.
50
Cleaning and Care
x
x
Function selector
Control lamp
EasyClean ® system
Temperature selector
with control lamp