General Recommendations; Clock Programming According To Haccp; Operational Cycles; Switching On - TRAPEZA 7NU0309CG54 Manual Uso Y Mantenimiento

GB - 22

GENERAL RECOMMENDATIONS

For correct use of the spike probe:
- avoid violent blows, they can jeopardise the correct functioning of the probe.
- sterilise the spike before use.
- the maximum recommended thickness of the product is 45mm.
- cleanliness of the spike determines good performance.
TO INSERT THE PROBE
- insert the probe with the point
as near as possible to the heart of the product.
- to only insert the part polishes.
TO EXTRACT THE PROBE
- heat the probe
- turn it
- extract it without tilting the spike

7.2 CLOCK PROGRAMMING ACCORDING TO HACCP

When machine is off, press simultaneously for extended time buttons
DISPLAY1 indicates the last fi gure of the year
DISPLAY2 indicates the letters "YY" "MM" "dd" "hh" "mm".
Turn dial
year
By pressing the
Exit from the clock menu occurs automatically after 60 seconds or by pressing the

7.3 OPERATIONAL CYCLES

7.3.0. SWITCHING ON

By pressing the
No selection is visible in DISPLAY 1 (Fig.1).
DISPLAY 2 indicates the cabinet temperature.
(Fig.1)
see 7.3.7.
in a clockwise or anti-clockwise direction to change:
mounth
to confi rm the value entered and pass on to the next value.
button the board switches on.
SINGLE POINT-PROBE
H 45mm
MULTI POINT-PROBE
H 45mm
day hour
( +3°C) and .
minutes
button.