TRAPEZA 7NU0309CG54 Manual Uso Y Mantenimiento página 24

GB - 24
7.3.2. +3ºC SOFT OR HARD BLAST CHILL CYCLE AND -18ºC SOFT OR HARD SHOCK FREEZING
WITH TIMER
HARD BLAST/SHOCK FREEZE PHASE
Press the
+3ºC hard cycle.
Press the
the -18ºC hard cycle.
DISPLAY 1: indicates the total time foreseen for blast chilling/shock freezing (Fig.6).
DISPLAY 2: indicates the cabinet temperature.
The following symbols light up: time
(Fig.6)
freezing soft
Turn the dial
N.B.: It is possible to set a duration either shorter or longer that 90 min. for blast chill cycles or 240
min. for shock freeze cycles.
Maximum limit: 120 min. for a +3°C cycle.
Maximum limit: 300 min. for a -18°C cycle.
Press the
By pressing button
inserted into the product, it will show the temperature of this product). At termination of the blast
chill/shock freeze cycle the machine automatically progresses to conservation. see 7.3.7.
(Fig.7)
By rotating the
button twice to select the +3ºC soft blast chill cycle and the
button twice to select the -18ºC soft blast chill cycle and the
or hard
to change the cycle duration.
button to start the cycle.
(Fig.7) the temperature read by the pin probe is temporarily displayed (if
it is possible to visualize the elapsed time from the beginning of the cycle.
+3 SOFT
-18 SOFT
, type of blast chilling soft
temperature and
button twice for the
button twice for
or hard
.
+3 HARD
-18 HARD
shock