Service Information - Stanley STSP125 Manual De Instrucciones

16 • ENGLISH
plastic parts may be cleaned with a damp cloth and
mild detergent. Although these parts are highly solvent
resistant, NEVER use solvents.
TOOL CARE
Avoid overloading the power tool. Overloading will
result in a considerable reduction in speed and efficiency
and the tool will over heat. In this case, run the power
tool at no load for a minute or two until cooled to normal
working temperature by the built in fan. Switching your tool
on and off whilst under load will considerably reduce the
life of the tool.
IMPORTANT
To ensure product safety and reliability, repairs,
maintenance and adjustment (other than those listed
in this manual) should be performed by authorized
service centers or other qualified organizations, always
using identical replacement parts. Unit contains no user
serviceable parts inside.
ACCESSORIES
The performance of any power tool is dependent
on the accessory used. STANLEY accessories are
engineered to high quality standards and are manufactured
from the best materials. Stringent tests are performed
before the accessories are launched in the market. They
are designed to enhance the performance of power tools.
Purchase STANLEY accessories to bring your STANLEY
power tools to greater performance. Recommended
STANLEY accessories are available at your local
authorized dealers or service centers. STANLEY offers
a large selection of accessories at your local dealer or
authorized service center.
Note: Use only wheels rated at least equal to the
maximum speed marked on the tool.
Warning! The use of any other accessory not
recommended for use with this tool could be hazardous.
Warning! Only stone-cutting diamond wheel can be
used. Do not use grinding wheel or toothed blades.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Stnley product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.

SERVICE INFORMATION

STANELY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide customers
with efficient and reliable power tool service. For more
information about our authorized service centers and
if you need technical advice, repair, or genuine factory
replacement parts, contact the STANLEY location nearest
you.
SPECIFICATIONS
Power
Voltage
AR
B2C
B3
B2
BR
No-load speed
Wheel diameter
Depth of cut
Weight
STSP125
1270W
220V ~ 50Hz
220V ~ 50Hz
120V ~ 60Hz
220V ~ 60Hz
127V ~ 60Hz
13000/min (rpm)
125mm (4-7/8")
41mm (1-5/8")
3.1kg