Removing The Secure Router 4134 Internal Pvm - Avaya 2330 Manual Del Usario

English
5. Install the access panel onto the Secure Router 4134.
6. Install the two screws that secure the service access panel to the Secure Router

Removing the Secure Router 4134 internal PVM

Use the procedure in this section to remove a PVM from the Secure Router 4134.
Prerequisites
• Ensure the Secure Router 4134 has the power switched off. You cannot hot swap internal
components.
• Ensure you have a Phillips #2 screwdriver.
• Ensure you have an antistatic bag or sheet available for the PVM that you are
removing.
Procedure steps
1. Remove the Secure Router 4134 service access panel. SSee Removing the Secure
2. Locate the PVM.
34 Regulatory Information
4134.
Router 4134 service access panel.
Voltage:
Do not open the Secure Router 4134 service access panel while the unit is
powered.
Comments? infodev@avaya.com
August 2013