Brinly PCT-17BH Manual Del Proprietário página 12

================================================================================================
Assembly Step 9-A
Hardware Panel 6
To install wheels, assemble parts
on the axle (20) as follows:
- Wheel Spacer (21)
- Bushing (15)
- Wheel (19)
- Bushing (15)
15
Note: Install the wheels so that the grease fitting faces out.
Assembly Step 9-B
Hardware Panel 6
Use pliers to snap retaining ring (14) in to groove on axle (20). Two
extra bushings (15) are also provided in case you need to take up
end play on Axle (20).
NOTE: Wheels come without grease in them!
Use a grease gun to lubricate wheels and axle assembly prior to use.
Pump grease until grease starts coming out around bearing either
inside hub or outside hub.
English Manual
ASSEMBLY
15
21
19
12
15
15
21
14
19
20
L-1821-H