Maintenance - Brinly PCT-17BH Manual Del Proprietário

================================================================================================
INSTALLING CART
CAUTION: AVOID INJURY! Before installing
cart, make sure dump lever is locked.
1. Lock cart in place: Lock bracket + foot pedal (8).
2. Park towing vehicle safely (See Towing Vehicle Manual).
3. Align cart drawbar with towing vehicle drawbar.
4. Install hitch pin (13) through cart drawbar and
towing vehicle hitch. Secure clevis pin with 1/8 in.
spring locking pin.
UNLOADING CART
1. Park towing vehicle safely
(See Towing Vehicle Manual).
CAUTION: Avoid Injury! Before dumping cart:
Park towing vehicle safely.
Before backing up, make sure area is clear of
bystanders, especially children. Make sure cart is
installed to the towing vehicle. Evenly distribute
load before releasing lock bar.
Ensure the operator is at a safe distance when
dumping cart! The Lock Bar that releases the bed
has the potential to release quickly!
2. Move lock bar forward to release cart box.
3. Tilt cart bed back to unload cart.
4. Push cart down & move cart lock bar toward cart & lock
into place.
English Manual
OPERATION AND MAINTENANCE
8
13
REMOVING CART
CAUTION: AVOID INJURY, Before installing
cart, make sure transport latch is facing
toward cart dump lever and dump lever is
locked in place.
NOTE: Refer to illustrations in the Installing Section, earlier in
this manual.
1. Park towing vehicle safely (See Towing Vehicle Manual).
2. Unload cart.
CAUTION: AVOID INJURY! Keep body parts
from under drawbar.
3. Remove cotter pin and drawbar pin.
4. Push cart away from towing vehicle. Block cart wheels.
5. Install drawbar pin and cotter pin in cart drawbar for
storage.
LUBRICATING
WHEEL BEARINGS
1. Lubricate each wheel bearing
with a multipurpose grease or
an equivalent.
2. Wash cart bed after each use to avoid damage to bed or
hardware.
3. Unload cart before performing any maintenance to cart
assembly, including changing flat tires, etc.
14 L-1821-H