PrimeLab 1.0 Multitest Manual De Usuario página 167

Iron in Oil
(149)
12) Place 3ml vial into adapter and aplpy light shield.
13) Press TEST.
4
Note(s)
-> Use cuation to use exact amounts of sample as well as of reagents
as indicated in the test procedure.
-> Always use new and clean vials and filter equipment. Do NOT re-use.
-> Keep 3ml-vials clean and free of fingerprints and dirt to avoid mis-
readings.
!
Assessment of the measurement value relative to the ideal range defined by you.
Measurement value for this parameter is outside the value range of this method.
134
50 - 500 mg/l
Name on device: 149-Iron-Oil-liq
Possible messages in the line below the measurement value:
"low! / high! / good!":
"Overrange! / underrange!":
2+
(Fe )
134