PrimeLab 1.0 Multitest Manual De Usuario página 171

Legionella
(147)
Continued...
C) Measurement procedure for C) ZERO + TEST
1) Place filled 1ml LG-CB vial into the adapter. Place the light shield
4
(PLSp-LS-1) on top and press ZERO.
2) Place filled 1ml LG-CB vial into the adapter. Place the light shield
4
(PLSp-LS-1) on top and press TEST.
3) The determined result is immediately displayed. Press the "OK" button
4
to save the result together with date and time.
!
Assessment of the measurement value relative to the ideal range defined by you.
Measurement value for this parameter is outside the value range of this method.
138
60 - 1000000 cfu/test
Name on device: 147-Legionella-liq
Possible messages in the line below the measurement value:
"low! / high! / good!":
"Overrange! / underrange!":
Liquid
Continued...
138