FujiFilm SonoLite M-OB/GYN Office Guia Del Usuario

M-OB/GYN Office™ Ultrasound System
User Guide
Introduction
This M-OB/GYN Office Ultrasound System User Guide is for use with the M-Turbo Ultrasound System User
Guide:
• The M-OB/GYN Office Ultrasound System User Guide lists the exam types, imaging modes, and
calculations available on the M-OB/Gyn Office™ ultrasound system.
• The M-Turbo Ultrasound System User Guide provides details on basic operation, system setup (including
OB calculation tables), patient and report forms, annotations, images, clips, references, safety, and more.
The basic functionality is the same on both systems.
Features
The ultrasound system includes the transducers, exam types, and calculations listed in
features may appear in the user interface but are unavailable if not configured on your ultrasound system.
In addition to the calculations, you can perform basic distance, area, circumference, and trace
measurements.
Table 1: Transducers, Exam Types, and Calculations
Exam
Transducer
Type 1
Gyn
C60x
ICTx
OB
1. Exam type abbreviations are as follows: Gyn = Gynecology, OB = Obstetrical
2. The optimization settings for 2D are Res, Gen, and Pen.
3. The optimization settings for CPD and Color are low, medium, and high (flow sensitivity) with a
range of PRF settings for Color depending on the setting selected.
For intended uses, see the obstetrical and gynecological intended-use sections in the M-Turbo Ultrasound
System User Guide.
2D 2
Calculations
M Mode
Gyn
X
Volume
OB X
Imaging Mode
PW
CPD 3 Color 3
Doppler
X X
X X
Table 1. Optional
X
X
1