Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Setting and starting a washing programme
Set the washing programme with the door ajar. The washing programme only starts after
you close the door. Until then it is possible to modify the settings.
Do these steps to set and start a washing programme:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press one of the programme buttons. Refer to the chapter 'Washing programmes'.
– The programme indicator light comes on.
– All other programme indicator lights go off.
4. Close the door.
– The washing programme starts automatically.
When the washing programme operates, you cannot change the programme. Cancel the
washing programme.
WARNING!
Only interrupt or cancel a washing programme if necessary.
CAUTION!
Open the door carefully. Hot steam can come free.
Cancelling a washing programme
1. Press and hold function buttons B and C until all the programme lights come on.
2. Release function buttons B and C to cancel the washing programme.
At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme .
Fill the detergent dispenser with detergent before you set a new washing programme.
Interrupting a washing programme
Open the door.
• The programme stops.
Close the door.
• The programme continues from the point of interruption.
Setting and starting a washing programme with delay start
1. Press the on/off button.
2. Press the delay start button until the indicator light with the correct number of hours
starts to flash (3, 6 or 9 hours).
3. Set a washing programme.
– The programme indicator light comes on.
4. Close the door.
– The countdown of the delay start starts.
– The countdown of the delay start decreases with step of 3 hours.
When the countdown is completed, the washing programme starts automatically.
Setting and starting a washing programme
17
Publicidad
Capítulos
Tabla de contenido
