Checks And Adjustments - EMAK EF102C/15,5H Manual Del Usuario

MAINTENANCE
maintenance battery-charger supplied (
(☛ 8.5).
IMPORTANT
CB01 maintenance battery-charger. For its use:
– follow the instructions given in the relative instruction booklet,
– follow the instructions given in the battery booklet.

6.3 CHECKS AND ADJUSTMENTS

Summary of the main situations where work may be required
Every time that ...
The blades vibrate
AThe blades tear the grass and the lawn
becomes yellow
The cut is uneven
The blades engage in an abnormal way
The machine does not brake
Forward movement is erratic
The grass-catcher jumps around and
tends to open up.
6.3.1 D
ISMANTLING
Blades that are badly sharpened tear at the grass, reduce collection and make
the lawn turn yellow.
WARNING!
!
when handling the blades.
To remove a blade, hold it firmly and undo
the central bolt (1) in the direction indi-
cated by the arrow for each blade,
noting that one of the fixing bolts has a
right-hand thread and the other one
has a left-hand thread.
This connector must only be used for connection to the
You will need to ...
Check the bolts (☛ 6.3.1) or balance the blades (☛ 6.3.1).
Sharpen the blades (☛ 6.3.1).
Adjust the alignement of the cutting deck (☛ 6.3.2).
Regulate the blade engagement adjuster (☛ 6.3.3).
Adjust the brake spring (☛ 6.3.4).
Adjust the stretcher spring(☛ 6.3.5).
Adjust the spring (☛ 6.3.6).
,
SHARPENING AND BALANCING BLADES
Wear strong gloves
➤
if included) or available on request
1
EN 41
1