EMAK EF102C/15,5H Manual Del Usuario página 75

HOW TO USE THE MACHINE
To start the engine it will be necessary that:
– the transmission is in "neutral";
– the blades are not engaged;
– the operator is seated or the parking brake is engaged.
The engine stops when:
– the operator leaves his seat when the blades are engaged;
– the operator leaves his seat when the transmission is not in "neutral";
– the operator leaves his seat with the transmission in "neutral" but without enga-
ging the parking brake;
– the grass-catcher is lifted or the stone-guard is removed when the blades are
engaged
The table below shows various operating conditions, highlighting why the safety
device shuts down the engine.
O G .-
PERATOR R CATCHER
A) PILOT LAMPS ON (Key in «ON» position)
Sitting YES
Sitting NO
B) WHEN STARTING (Key in «START» position)
Sitting –/–
Sitting –/–
Absent –/–
Sitting –/–
Sitting –/–
Absent –/–
C) WHEN MOVING ONLY (Key in «ON» position)
Sitting –/–
Absent –/–
Sitting YES
Absent YES
D) WHEN CUTTING (Key in «ON» position)
Sitting YES
Sitting NO
Absent –/–
Sitting NO
Absent YES
Absent YES
B T
LADES RANSMISSION
Disengaged «N»
Disengaged «N»
Disengaged 1...5 - F / R
Engaged «N»
Disengaged «N»
Disengaged «N»
Disengaged «N»
Disengaged «N»
Disengaged 1...5 - F / R
Disengaged «N»
Disengaged 1...5 - F / R
Disengaged «N»
Engaged –/–
Disengaged –/–
Disengaged «N»
Engaged –/–
Disengaged «N»
Engaged –/–
B E
RAKE
Engaged Stopped
Disengaged Stopped
Engaged Does NOT start
Engaged Does NOT start
Disengaged Does NOT start
Engaged Starts
Disengaged Starts
Engaged Starts
Disengaged Running
Engaged Running
Engaged Stops
Disengaged Stops
Disengaged Running
Disengaged Running
Engaged Running
Disengaged Stops
Disengaged Stops
Engaged Stops
EN 21
P
NGINE ILOT LAMPS
„í„„„„íí
„„„„„ííí
„í„„„„„„
íí„„„„„í
„„í„„„„í
„í„„„„„í
„„„„„„„í
„íí„„„„í
„„„„„„„„
„íí„„„„í
„í„„„„„„
„„í„„„„í
í„„„„„„„
„„„„„í„„
„íí„„„„í
í„„„„í„„
„„í„„„„í
ííí„„„„„