Epson SureColor S Serie Guia De Instalacion página 24

| Adjusting the Take-up Reel
22
Load the roll core with the adjustment paper into the roll holder:
2.
Place the core on the right roll holder.
•
Move the left roll holder over to hold the roll core in place.
•
Press the roll holder until part
•
left to lock it into place.
Slide the adjustment paper to the left side of the roll core and feed it into the printer. Pull the
3.
adjustment paper taut over the platen, align a ruler with the front side (closest to you) of the white line
and mark the adjustment paper with a pen.
is hidden as shown below, then turn the roll holder screw on the
A