Checking The Current Firmware Version; Updating The Firmware - Epson SureColor S Serie Guia De Instalacion

Checking the Current Firmware Version

Press the button.
Menu
1.
Press the button until
2.
d
Press the button again until
3.
d
version displayed. When finished, press the

Updating the Firmware

Before updating your printer's firmware, make sure your printer is turned on and connected to your
computer or network.
Click the
EPSON LFP Remote Panel 2
1.
Panel 2. Make sure your printer is selected from the drop-down menu.
Click the
Firmware Updater
2.
Click
Acquire Latest Information
3.
printer from the internet. If there is a firmware update, the message "Found the latest firmware
information. Do you want to download the firmware file?" appears. Click
Note: If the Acquire Latest Information button fails to download the latest firmware, you can also find it by
visiting Epson's support site epson.com/support (US) or epson.ca/support (Canada). You will need to
download the latest version and upload it by clicking Browse and locating the file, then continue from step 5.
When the message "File download complete" appears, click
4.
automatically be selected and appear in the File Name window.
Click and follow the on-screen instructions.
Update
5.
If the firmware version of the file is newer than what is currently installed, click
6.
firmware updating process.
Caution: Don't turn off the printer while the firmware is updating.
When the update is complete, close the Firmware Updater window and EPSON LFP Remote Panel 2
7.
window.
If you connected to your printer through a network, follow the instructions in the next section to
configure the printer for your network.
Checking the Current Firmware Version
is highlighted, then press
Printer Status
Firmware Version
y
back button.
icon on your desktop. You see the EPSON LFP Remote
button. You see the Firmware Updater window.
to automatically download the latest firmware version for your
.
OK
is displayed, then press
OK
Yes
. The file you just downloaded should
OK
|
31
. Note the firmware
to download the file.
to start the
Update