Configuring The Printer For Your Network - Epson SureColor S Serie Guia De Instalacion

|

Configuring the Printer for Your Network

32
Configuring the Printer for Your Network
Once the printer is connected to your network, follow these steps to configure it:
Turn on the printer.
1.
Start EpsonNet Config.
2.
The EpsonNet Config program you installed from the CD that came with your printer searches for all
EPSON printers on the network and displays the MAC address for each printer that it finds.
Highlight the printer you want to configure and click
3.
screen.
If necessary, contact your network administrator for instructions on assigning an appropriate IP
4.
address. A static IP address is recommended.
EPSON and SureColor are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson
Corporation.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective
owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
to access the TCP/IP selection
Configuration