Adjusting The Media System; Adjusting The Take-In Reel - Epson SureColor S Serie Guia De Instalacion

Adjusting the Media System

After completing printer assembly, use the included roll core and adjustment paper to perform parallel
adjustment of the take-in and take-up reel. This ensures that the media will be fed straight and helps
reduce printing errors. The operation requires two people to perform any necessary adjustments in tandem
from the front and the back of the printer. Make sure the printer is leveled and on a level surface.

Adjusting the Take-in Reel

Open the front cover of the printer and remove the tape from the inside.
1.
Push the media loading lever back as shown.
2.
Adjusting the Media System |
17