Basic Operations; Parking Brake Inhibit; Mute; Power On / Off - NORAUTO NS-411 BT Manual De Uso

Parking Brake Inhibit

• When the "BRAKE" cable is connected to the brake switch, the display on the TFT monitor will
display video only when the vehicle is applied.
• Parking brake function is overridden when the video source is set to REVERSE.
• When the parking brake inhibit is active, the front monitor displays "WARNING Do not watch
video while driving!", preventing the driver from watching content while driving. Rear video
screens are not affected.

Mute

Press [ ] knob or the [ MUTE ] button on remote control to mute the volume from the unit.
Press again to restore the volume. [
any of the audio setup features cancels the mute function.

Power On / Off

Press the [
unit on. The current mode status appears in the LCD.
Press and hold the [

Audible Beep Confirmation

An audible beep tone confirms each function selection. The Beep tone can be disabled through
the Setup menu.

Playing Source Selection

Press the [ MENU ] button on the front panel or the [ SRC ] button
on the remote to change between available playing sources. The
playing mode is displayed on the screen.
1. Date and Time display. Double click to switch to Clock mode.
2. Function icons
3. or : Touch this page button to view the first or second
page of on-screen buttons. You also can drag left or right on the
blank area to switch the pages.
4. Touch repeatedly to change wallpapers.
5. Touch for quick access to Equalizer level settings.

Volume Adjustment

To increase or decrease the volume level, turn the [
on the front panel or press the [ VOL+ ] / [ VOL ] button on the
remote control. The volume ranges from "0"to "39". The LCD or
TFT screen displays the volume level for 3 seconds.

EQ Menu

The Audio Control feature allows you to easily adjust your audio
system to meet the acoustical characteristics of your vehicle, which
vary depending on the type of vehicle and its measurements.
Proper setting of the Fader and Balance boosts the effects of the
cabin equalizer.

Basic Operations

] knob on the unit (or the [ POWER ] button on the remote control) to turn the
] knob to power off the unit.
] is displayed on the LCD. Adjusting the volume or using
] knob
61
2
1
3 4 3 5
3