Brilix JET SWIM ELEGANCE 70 Guía De Instalación Y Usuario página 7

EN
5. Fitting of the 'jet swim' front cover
The complete front cover is delivered mounted and contains parts no. 1 to 12 (see picture 3). The exception
is the transparent pneumatic hose (no. 2) being already a part of the 'jet swim' body (see picture 4).
Follow these steps while mounting the front cover:
- Connect the hose no. 2, pull it up to the horn of the pneumatic switch (no. 1 in the picture 3) 3).
- Connect the hose no. 13, insert it into the jet on the front cover.
- Connect the complete front cover to the 'jet swim' body and make sure that the ring (no. 12) is inserted
in the nozzle of the displacement opening (75 mm diameter).
- Tighten all four screws (no. 3 in the picture 3) While they are fitted tightly, the front cover is ready to use.
7