Brilix JET SWIM ELEGANCE 70 Guía De Instalación Y Usuario página 9

EN
7. Use and settings of ELEGANCE 'jet swim'
from the water current or water with air created by this unit. Press the pneumatic switch to set the 'jet swim'
from the pool (no. 1 in the picture 6). The turned on 'jet swim' force is: only the water current or water
with the air. It depends on setting of the front jets (see picture 6). Only the water current: Maximum water
flow is achieved by turning the inside jet 2 in the picture 6) to the left. You will reduce the water current by
turning the jet to the right. The water current with the air: For setting or reducing the air flow, turn the outside
jet (no. 3 in the picture 6).
JET SWIM NOZZLE DETAIL
MAXIMUM FLOW
MANIMUM FLOW
Picture 6
9