Technical Data; Front Panel - ESAB SMASHWELD 316 Manual De Instrucciones

4) TECHNICAL DATA

The table 4.1 indicates the authorized loadings for the power source Smashweld 316 and Smashweld 316
Topflex.
The table 4.2 supplies the characteristics of the wire feeder module of the Source Smashweld 316 and of
the Wire feeder Origo™ Feed 302.
4.1) Power Sources Smashweld 316 and Smashweld 316Topflex
TABLE 4.1
ABNT Standard
Empty voltage range (V)
Current/Voltage range (A/V)
Nominal current @ 60% D.C
Authorized load
Duty cycle %
Welding current (A)
Voltage
Electric three-phase feeding ( V - 50/60 Hz)
Rated apparent power (KVA)
Thermal class
Protection level
Dimensions (L x C x A - mm)
Weight (kg) Smashweld 316 (Kg)
Weight (kg) Smashweld 316 Topflex (without the wire feeder) (Kg)
4.2) Wire Feeding Module of the Smashweld 316 and Origo™ Feed 302 Feeders
TABLE 4.2
Electric feeding ( V - 50/60 Hz)
Wire speed range (m/mm)
Motor reducer
Wire diameter (mm)
Weight of the wire feeder - without wire (kg)
5) CONTROLS AND MAIN COMPONENTS

5.1) Front panel

For Smashweld 316 and Smashweld 316 Topflex:
18 - 45
50/17 - 400/34
35
315
29,8
220/380/440
H (180°C)
530 x 980 x 850
42
cc - permanent magnet
Smashweld 316
Origo™ Feed 302
Solid steel
Aluminium alloys
Cored
16
I
270
60 100
270 220
27,5 25
7,3
IP 22
130
128
1.50 - 19.00
1.50 - 22.00
0.60 - 1.20
0.80 - 1.20
0.90 - 1.20
Smashweld 316
Smashweld 316 Topflex
23