Shark S3901 Serie Guia Del Usuario página 14

fig. 3
IMPORTANT: Always make sure the mop is
UNPLUGGED from the wall when not in use. Never
fill the mop, attach the mop head, change or remove
the cleaning pad when the mop is plugged into the
wall.
Make sure you only add water to the tank. Chemicals
or cleaning solution may damage the appliance and
could be unsafe for you and your family.
STEAM MOP ASSEMBLY
1 Screw the mop handle into the Steam Mop Housing
(screwdriver not included). (fig. 1)
2 Secure the mop head inside the microfiber cleaning
pad. (fig. 2)
3 Snap the Steam Mop body onto the mop head.
(fig. 3)
14 1.800.798.7398
fig. 1
fig. 4
4
5
Open the water tank cap, fill the tank with water, then
replace and tighten the cap. (fig. 4)
Use the filling flask and pour water into the tank. Do
not overfill. Replace the cap on the water tank.
(fig. 5)
NOTE: To prolong the life of your Shark
Lift-Away Pro Steam Pocket
™
recommend using distilled water.
IMPORTANT: Do not use on unsealed wood or
unglazed ceramic floors. On surfaces that have been
treated with wax or some no wax floors, the sheen
may be removed by the heat and steam action. It
is always recommended to test an isolated area
of the surface to be cleaned before proceeding.
We recommend that you check the use and care
instructions from the floor manufacturer.
fig. 2
fig. 5
®
Mop we
®