Using The Direct Steam Nozzle - Shark S3901 Serie Guia Del Usuario

PLEASE KEEP THESE IMPORTANT SAFEGUARDS
IN MIND WHEN USING THE APPLIANCE:
CAUTION: Do not press the steam trigger until
the Direct Steam Nozzle is snapped into the main
nozzle of your Handheld Steamer.
NOTE: To remove the Direct Steam Nozzle, press
and hold down the Handheld Release Buttons.
Then slide out the Direct Steam Nozzle using the
grip.
22 1.800.798.7398
fig. 9

Using the Direct Steam Nozzle

How to Attach / Detach:
• The Direct Steam Nozzle Slides Directly on to the
handheld steamer. (fig. 9)
• To remove wait 2-3 minutes for the tool to cool, hold the
release button and pull the tool away from the unit.
Usage:
• The Direct Steam Nozzle creates direct steam spray to
clean and sanitize hard to reach nooks & crannies, flat
surfaces, toys and other places where germs may build
up. (fig. 10)
• Spray direct steam and wipe clean with a wet cloth or
paper towel.
Cleaning Tips:
• For effective cleaning, hold the steam output nozzle 1-2
inches away from the surface you're cleaning.
CAUTION: Do not press the steam trigger while
removing the Direct Steam Nozzle. Avoid touching
the tip of the Direct Steam Nozzle, as this will be
very hot after steaming.
NOTE: The Handheld Steamer may continue to
emit steam for a few seconds after the trigger is
released. This is normal, and the steaming will
eventually come to a stop.
fig. 10