6. Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections.
3. Mechanically moving parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
7. Technical Specifications
power supply
power consumption
smoke output
DMX input/output
warm-up time
dimensions
weight
suitable smoke liquids
suitable cleaning liquid
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. For more info
concerning this product, please visit our website www.velleman.eu. The information in this
manual is subject to change without prior notice.
© COPYRIGHT NOTICE
This manual is copyrighted. The copyright to this manual is owned by Velleman nv.
All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced
to any electronic medium or otherwise without the prior written consent of the copyright holder.
10.11.2009
VDP1500SSM
max. 230 VAC ~ 50 Hz
1500 W
± 150 m³/min
3-pin XLR
± 10 min
360 x 300 x 135 mm
8 kg
HQPower™ standard smoke liquid, 5 litres (order code VDLSL5)
HQPower™ high-density smoke liquid, 5 litres (order code VDLSLH5)
HQPower™ pro high-density smoke liquid, 5 litres (order code VDLSLHT5)
HQPower™ smoke machine cleaning liquid, 0.25 litre (order code VDLCL)
4
Rev. 01
©Velleman nv