Flex FX3181 Manual Del Operador página 14

PRESELECTING THE SPEED (FIG. 9)
NOTICE: This function is available only on
model of FX3181A.
Your tool is equipped with a memory function.
After turning the tool off, the tool will revert to
the previous setting when it is turned on again.
Use the + or - button to increase or decrease
the speed. Each press changes the speed one
level. The table below shows the relationship
between rotational speed and the number of
LEDs that shine in the indicator on the foot of
the tool.
The Number of LEDs
ON OFF
WARNING
running for safety reasons.
ADJUSTING THE GUARD (FIG. 10)
To adjust the tool to suit the task at hand, the
guard hood can be adjusted by 12 notches or
360° without a tool.
WARNING
a. Remove the battery pack from the tool.
b. Turn guard opposite to the direction-of-
rotation arrow on the gear head to the
required position.
ADJUSTMENTS
Speed (RPM)
3500
5000
7000
10000
Never change speed
setting while the tool is
Risk of injury! Wear
protective gloves.
Fig. 9
Press Button for
Preselecting the Speed
(Only for FX3181A)
X
Fig. 10
-14-
click
click
click