Denon AVC-A11SR Instrucciones De Operación página 16

ENGLISH
NOTES:
• The OPTICAL 4 and 5 jacks on the AVC-A11SR's rear panel are equipped with an optical digital output jack
for recording digital signals on a DAT deck, MD recorder or other digital recorder. Use this for digital
recording between a digital audio source (stereo - 2 channel) and a digital audio recorder.
• Do not connect the output of the component connected to the OPTICAL 4 OUT jack on the AVC-A11SR's
rear panel to any jack other than the OPTICAL 4 IN jack.
• Do not connect the output of the component connected to the OPTICAL 5 OUT jack on the AVC-A11SR's
rear panel to any jack other than the OPTICAL 5 IN jack.
• "PHONO" cannot be selected on the Digital In Assignment screen.
Setting the on-screen display (OSD)
• Use this to turn the on-screen display (messages other than the menu screens) on or off.
1
At the System Setup Menu select "On Screen Display".
TUNING
BAND MODE
TUNING
2
Switch to the On Screen Display screen.
ENTER / SH FT
SELEC
3
Select "ON" or "OFF".
UNING
BAND M E
TUNING
4
Enter the setting.
ENTER / SH FT
The System Setup Menu reappears.
SELEC
This completes system setup. Once these settings are made, there is no need to change them unless
different AV components are connected or the speakers are repositioned.
After completing system setup
This button can be pressed at any time during the system setup process to complete the process.
1
At the System Setup Menu, press the SYSTEM SETUP button.
The changed settings are entered and the on-screen display turns off.
16
• On-screen display signals
Signals input to the AVC-A11SR
VIDEO signal input S-video signal
jack (yellow) input jack
1
E E
2
C E
3
E C
4
C C
( C : E : ) ( C :
Signal No signal
NOTES:
• The on-screen display signals are not output from the video signal MONITOR OUT-2 (yellow) or S-Video
signal MONITOR OUT-2 jacks.
• The on-screen display signals are not output from the color difference (component) video signal MONITOR
OUT jacks.
• For 4 above, the on-screen display signals are output to the VIDEO MONITOR OUT-1 video signal output
jack (yellow) if the monitor TV is not connected to the S-video MONITOR OUT-1 video signal output jack.
On-screen display signal output
VIDEO MONITOR OUT-1 video S-video MONITOR OUT-1 video
signal output jack (yellow) signal output jack
C C
C E
E C
E C
E :
On-screen signals output On-screen signals not output
)