Specifications; Remote Control Unit (Rc-899) - Denon AVC-A11SR Instrucciones De Operación

ENGLISH
2 Differences in surround mode names depending on the input signals
Sur ound Mode
ANALOG LINEAR PCM
PURE DIRECT, DIRECT C C
STEREO C C
HOME THX CINEMA THX THX
E E
DTS SURROUND
DTS NEO 6 DTS NEO 6 DTS NEO:6
E E
DOLBY DIGITAL
II
DOLBY PRO LOGIC DOLBY DOLBY
II II
PRO LOGIC PRO LOGIC
DSP SIMULATION C C
C : Selectable
: The surround mode name differs depending on the "SB CH OUT" surround parameter setting.
B : The surround mode name differs depending on the input signal.
E : Not selectable
42
Input signals
DTS
DTS 5.1 ch) DTS 96/24(5 1 ch) DTS 6.1 ch) D. D. (2 ch)
C C C C
C C C C
B
THX MTRX6 1 THX5.1 THX DSCRT6 1 THX
THX5.1 THX MTRX5.1
B E
DTS ES MTRX DTS ES MTRX DTS ES DSCRT6 1
DTS SURROUND DTS 96/24 DTS MTRX6.1
E E E
DTS NEO 6
E E E E
E E E
DOLBY
PRO LOGIC
C C C C
16

SPECIFICATIONS

2 Audio section
DOLBY DIG TAL
• Power amplifier
D. D. 5.1 ch)
Rated output:
C
C
THX SURROUND EX
THX5.1
E
E
6,1 SURROUND
DOLBY DIGITAL
Dynamic power:
E
II
C
Output terminals:
• Analog
Input sensitivity / input impedance:
Frequency response:
S/N:
Distortion:
Rated output:
• Digital
D/A output:
Digital input:
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
RIAA deviation:
Signal-to-noise ratio:
Rated output / Maximum output:
Distortion factor:
2 Video section
• Standard video jacks
Input / output level and impedance: 1 Vp-p, 75 Ω/ohms
Frequency response:
• S-video jacks
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
Frequency response:
• Color component video terminal
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
Frequency response:
2 General
Power supply:
Power consumption:
Maximum external dimensions:
Mass:

2 Remote control unit (RC-899)

Batteries:
External dimensions:
Mass:
* For purposes of improvement, specifications and design are subject to change without notice.
Front:
125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
180 W + 180 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
Center:
125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
180 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
Surround:
125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
180 W + 180 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
Surround Back:
125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
180 W + 180 W (6 Ω/ohms, 1 kHz with 0.7% T.H.D.)
170 W x 2 ch (8 Ω/ohms)
270 W x 2 ch (4 Ω/ohms)
350 W x 2 ch (2 Ω/ohms)
Front/Center/Surround Back: 6 ~ 16 Ω/ohms
6 ~ 16 Ω/ohms
Surround: A or B
8 ~ 16 Ω/ohms
A + B
200 mV / 47 kΩ/kohms
10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)
105 dB (DIRECT mode)
0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
1.2 V
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.005% (1 kHz, at 0 dB)
S/N ratio — 110 dB
Dynamic range — 108 dB
Format — Digital audio interface
2.5 mV
±1 dB (20 Hz to 20 kHz)
74 dB (A weighting, with 5 mV input)
150 mV / 8 V
0.03% (1 kHz, 3 V)
5 Hz ~ 10 MHz — +0, –3 dB
C (color) signal — 0.286 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz — +0, –3 dB
(blue) signal — 0.7 Vp-p, 75 Ω/ohms
P /C
B B
(red) signal — 0.7Vp-p, 75 Ω/ohms
P /C
R R
DC ~ 50 MHz — +0, –3 dB
AC 230 V, 50 Hz
600 W
434 (W) x 179 (H) x 485 (D) mm
20.5 kg
R6P/AA Type (three batteries)
61 (W) x 230 (H) x 34 (D) mm
200 g (not including batteries)