Press the fuel pump (primer) 6x
Mixing ratio: 40 parts petrol to 1 part oil
Petrol: RON 95/RON 98
2-stroke-motor oil: ISO-L-EGD/JASO FD
Risk of fatal electrical shock! Keep at least 10 m away from
overhead power lines!
Attention! Falling objects.
Especially when cutting above head height.
Attention! Risk of injury due to running blades!
Keep a safe distance away!
General warning!
1. Push the pin on the front boom into the groove on the
engine unit boom as far as the stop.
2. Once it is correctly inserted, the red line must match up
with the one on the engine unit boom.
3. If this is not possible, pull on the starter pull cord to adjust
the shaft.
ATTENTION! The On/Off switch
Protect the appliance from rain and moisture!
min
-1
Max. 9000 min
-1
(rpm)
max. 9000
Attention! Left-hand thread.
Beware of flung objects!
Beware of kickback!
Caution! Risk of injury from rotating cutting blade!
Keep hands and feet away!
Attention – petrol is highly flammable!
Explosion hazard! Do not spill fuel!
Turn the appliance off and disconnect the spark plug before
performing any maintenance work!
FBK 4 B2
20 h
must be set to "0".
Attention! Risk of suffocation!
Caution! Poisonous CO vapours (carbon monoxide vapours)!
Do not use the appliance in confined spaces!
Warning! Do not use circular saw blades for the cutting
blade function.
Add a little grease after every 20 hours of operation
(gear grease)
A distance of 15 metres must be maintained between the
machine and third parties!
The cutting tool continues running after it is turned off
(cutting blade/cutting filament)!
Sound power level LWA data in dB.
Fire, naked flames and smoking are prohibited!
GB │ IE
│
23
■