Snap-On CENTER POST Manual De Instrucciones página 6

P/N: EAL0408G44A
P/N: 8-23562A
6
Safety
Safety Label Meanings
CAUTION: MAKE SURE THAT THE SAFETY
SIGNS ARE ALWAYS CLEARLY VISIBLE
IN THE POSITIONS INDICATED BY THE
MANUFACTURER.
For any reset, use the Part Number (P/N) listed in this
chapter.
EAL0408G44A
Risk of fl ying fragments during beading.
The use of the bead seater device could cause the
•
ejection of objects and a high acoustic pressure. We
therefore recommend the use of protection equipment
for eyes and ears.
When using compressed air for the beading operation
•
there is also the risk of the tyre exploding.
Avoid excessive pressure. Do not exceed the maximum
•
pressure indicated by the tyre manufacturer.
The risk of outbreak also depends on the general
•
conditions of the tyre and the rim. Check the tyre before
infl ating it.
The bursting of tyres can cause serious injury or death.
8-23562A
Risk of electric shock from live machine.
• Do not use equipment with a damaged power cord or
other electrical or mechanical damage until it has been
examined by a service technician authorised by the
manufacturer.
• Unplug equipment from electrical outlet when not in use.
Never pull the cord to remove the plug from the outlet.
Grasp plug and pull to disconnect it.
• Do not expose the equipment to rain. Do not use on damp
surfaces.
• Plug unit into the correct power supply outlet.
• Do not remove or bypass the earth connection.
Risk of electrical shock. High voltages are present within
the unit.
• There are no user serviceable items within the unit.
• Servicing on the unit must be performed by qualifi ed
personnel.
• Do not open any part of the unit other than known and
allowed areas.
• Turn the power switch off and unplug the unit before
servicing.
Contact with high voltages (e.g.: with the terminals of
the switches, wires and relevant connections) can cause
serious injury or death.
IMPORTANT!! KEEP THESE
INSTRUCTIONS