Snap-On CENTER POST Manual De Instrucciones página 8

P/N: EAL0408G43A P/N: EAL0413G17A
P/N: EAL0408G42A P/N: EAL0383G02A
P/N: EAL0408G78A
P/N: EAL0413G13A
8
Safety
EAL0408G43A - EAL0413G17A
Risk of crushing.
• Become familiar with all controls before proceeding with
operation.
• Stand away from the bead breaker arm when in operation.
• If necessary for improved bead breaker control, operate
it in steps.
• Do not allow unauthorised people to approach the
working area.
Contact with moving parts could cause injury.
EAL0408G42A - EAL0383G02A
Risk of pinching or crushing hands and fi ngers/toes.
• Keep hands and fi nger/toes clear of rim edge during
operating steps.
• Keep hands and fingers/toes clear of mounting/
demounting tool during operation.
• Keep hands and fi ngers/toes and other body parts away
from moving surfaces.
• Do not use tools other than those supplied with the tyre
changer.
• Do not use unapproved accessories (see the Accessories
Plan).
• Do not by-pass in any way the safety devices.
• Use special solutions to prevent tyre friction.
Accidental contact with moving parts could cause injury.
EAL0408G78A
Personal protection equipment warning.
• The plate shows the equipment required for use of the
unit.
• Wear the indicated equipment before operating the
machine.
THE USE OF PERSONAL PROTECTIVE
EQUIPMENT IS A LEGAL REQUIREMENT.
EAL0413G13A
Risk of injury. Tools may break or slip if improperly used
or maintained.
• Use the correct tool for the task.
• In accordance with the maintenance plan, inspect and
clean all tools.
• Follow recommended procedures when performing
services.
Tools that break or slip can cause injury.
IN ORDER TO USE THE MACHINE THE
OPERATOR MUST KNOW THE MEANING OF ALL
THE PICTOGRAMS FOUND ON THE MACHINE.
IMPORTANT!! KEEP THESE
INSTRUCTIONS