Before You Begin - HP LaserJet 5100 Mantenimiento

Before you begin

Before you begin to install the printer maintenance kit, perform the
following steps:
1
2
WARNING! Severe injury can result if you attempt to service the printer while it is
plugged into a power outlet.
3
4
WARNING! To avoid possible burns from the fuser, turn off the printer to allow the
fuser to cool for 30 minutes before removing it from the printer.
This printer has some sharp, sheet-metal edges which can cause injury.
Also, you might want to remove jewelry that might snag on parts inside
the printer.
Replacing printer parts
Replacement is generally the reverse of removal. Occasionally,
information is included to provide direction for difficult or critical
replacement procedures.
Removing loose toner
Loose toner might be present inside the printer, on printer parts, or on
the print cartridge. If toner gets on your clothing, wipe it off with a dry
cloth and wash clothing in cold water.
CAUTION Hot water sets toner into fabric.
6
Installing the printer maintenance kit
Turn off the printer.
Unplug the power cord from the power outlet.
Remove all paper-handling accessories (such as an optional
duplexer and any optional trays) and interface cables from the
printer.
Remove the print cartridge and store it in a dark location until you
have installed the printer maintenance kit.
ENWW