Replace The Optional 500-Sheet Tray Separation Roller - HP LaserJet 5100 Mantenimiento

Step 7 Replace the optional 500-sheet tray
separation roller
Note If no optional 500-sheet tray is installed in the printer, skip this step and
go to "Replace the fuser" on page 22.
1
2
Figure 15 Removing the separation roller
ENWW
With one hand, lift the return cover (Figure 15, item 2).
With the other hand, pinch the separation roller tab (item 1), and
slide the separation roller off of the shaft and remove.

Replace the optional 500-sheet tray separation roller

21