Machine Operation - SPM FROSTY DREAM 2 Manual De Instrucciones

8 - MACHINE OPERATION

a) To dispense the product, position the cup under the
tap (I) and pull the dispensing lever (L) (see figure 9).
b) Adjusting the consistency.
To alter the consistency of the product, turn the screws
located on the back of the machine in the following
way: clockwise to make the product less dense,
anticlockwise to make the product denser.
Warning !!
This device only changes the consistency of the
product to be dispensed. It does not effect the cooling
temperature of the product.
Warning !!
When the level of the slush inside the bowl is below the
mixing spiral, to prevent the product from becoming too
thick, it is necessary to turn off the refrigerating system by
using the appropriate switch
(F) or by refilling the bowl.
Fig. 9
Fig. 10
21