Start-Up Procedures - SPM FROSTY DREAM 2 Manual De Instrucciones

18
BEFORE STARTING THE MACHINE, CARRY OUT
THE CLEANING AND SANITIZATION OPERATIONS
a) In a separate container, dilute and mix the product with
water, according to the directions given by the
manufacturer (see figure 3).
Fig. 3
Warning !!
Make sure that the mixture has a 13% minimum sugar
content; a lower concentration could seriously damage the
mixing parts, as well as the gearmotors.
NEVER USE ONLY WATER.
b) Pour the product obtained into the bowl (A) (see figure
Fig. 4
4).
c) Replace the luminous cover (B) (see figure 5).
Fig. 5
d) Insert the plug into an electrical outlet (see fig. 6).
e) Turn on the main switch
Fig. 6

5 - START-UP PROCEDURES

DESCRIBED IN PARAGRAPH 9
(D) (see figure 7).