Cleaning And Sanitising Procedures - SPM FROSTY DREAM 2 Manual De Instrucciones

22
Warning !!
All cleaning procedures must be carried out only after
having turned the general switch of the machine off.
For the machine to function properly, it is indispensable
that the cleaning procedures be carried out every
Fig. 11
evening, according to the following instructions:
a) Pull out the upper mixing device (O) by pushing it
slightly backwards, to remove it from its fixed position
(see figure 11).
b) Unscrew and slip off the knobs (P) then lower the
bowl (A) to eliminate any product residue through the
dispensing tap (I) (see fig. 12).
c) Pull the tank outwards, as shown in the figure, and
remove it fully from its seating (see figure 13). Wash
the tank carefully without using detergents or abrasive
powders which could damage it.
Fig. 12
Fig. 13

9 - CLEANING AND SANITISING PROCEDURES