Select Maintenance; Disclaimer - SPM FROSTY DREAM 2 Manual De Instrucciones

26
In order to guarantee for the efficiency of the refrigerating
system, it is essential that the condenser be properly
cleaned at regular intervals, according to the following
procedures:
- disconnect the machine from its power supply;
Fig. 24
- remove the left panel of FROSTY DREAM 2;
- remove the left panel of FROSTY DREAM 3;
- with a brush, remove any dust that has infiltrated
between the blades of the condenser (see figure 24).
In order to access the bulb of the luminous cover for
future replacement, press on the small panel (AC) which
is foud on the cover (see figure 25).
To adjust the thermostats and to access the fuses,
remove the grating panel on the right side (control side).
Furthermore, in order to access the instrument
compartment of the machine, so as to carry out any
Fig. 25
further select maintenance operations, unscrew the
entire stainless steel casing.
The manufacturer declines all responsibility for any
damage and/or injury that might be brought on, directly or
indirectly, to persons, animals or things as a consequence
of failure to comply with the instructions given in this
manual, and particularly, with the warnings concerning
installation, use and maintenance of the machine.
The manufacturer cannot be held responsible for possible
mistakes due to printing or copying errors contained in this
manual.
In addition, the manufacturer reserves the right to modify
his machines in any way deemed necessary or useful for
the machines, as well as for the benefit of the user, yet at
the same time maintaining the essential operative and safety
characteristics of said machines.

10 - SELECT MAINTENANCE

Warning !!

11 - DISCLAIMER