Device Specifications; Electronic Interference - MSA 10046203 Manual De Operación

Certifications
Tests completed by MSA verify that the Universal Pump Probe meets
applicable industry and government standards as of the date of
manufacture. Refer to device label to determine applicable approval.
Device Usage
This device to be used on the Solaris, Altair4, and Altair4X Multigas
Detectors only.

Device Specifications

Table 1-1. Device Specifications
TEMPERATURE RANGE
SAMPLE LINE TRANSPORT TIMES

Electronic Interference

• This device generates, uses, and can radiate radio frequency
energy. Operation of this device may cause interference, in which
case, the user may be required to correct.
• This device is test equipment and is not subject to FCC technical
regulations. However, it has been tested and found to comply with
the limits for a Class A digital device specified in Part 15 of the
FCC regulations.
• This digital apparatus does not exceed the Class A limits for radio
noise emissions from digital apparatus set out in the Radio
Interference Regulations of the CRTC.
• There is no guarantee that interference will not occur. If this device
is determined to cause interference to radio or television reception,
try the following corrective measures:
• Reorient or relocate the receiving antenna
• Increase separation between the device and the radio/TV
receiver
• Consult an experienced radio/TV technician for help.
1-2
NORMAL
25 feet
50 feet
-20 to +50°C (-4 to +122°F)
10 seconds
20 seconds