Operation; Control Functions; Drive Display - Franklin Electric SUBDRIVE UTILITY UT3P Manual Para Propietarios

OPERATION

Control Functions

Drive Display

The drive is equipped with three lights to provide system status and diagnostic information.
1. Power Light: A steady green light indicates the drive is powered on.
2. Status Light: A steady or flashing green light indicates drive status.
3. Fault Light: A steady or flashing red light indicates a system problem. Specific fault codes are identified
by a flash sequence. Refer to
The following table shows the various light combinations that describe system status.
LED Running
Symbol Legend
"Diagnostic Fault Codes" on page
Idle Off
On
30.
Transducer
Fault
Fault
Off
OPERATION
Control Functions
Invalid
Broken Pipe
Configuration
Flashing
27