Installation Planning; Planning Considerations - Franklin Electric SUBDRIVE UTILITY UT3P Manual Para Propietarios

INSTALLATION PLANNING

Planning Considerations

INSTALLATION PLANNING
Planning Considerations
The planned usage of the overall
system will determine which options
STEP 1
and control methods are
appropriate, as well as how the drive
should be installed and
Plan System
programmed. Refer to the following
Goals
pages for examples of how the
system might be used.
System options define and automate
features that support the intended
STEP 2
operation. These features may
require specialized control methods
and programming. For more details,
Identify
refer to "Drive Configuration" on
Options
page 22, and "Performance
Settings" on page 25.
STEP 3 The drive supports several methods
for automating pump motor speed
control. Refer to "Drive
Select
Configuration" on page 22 for
Control
possible control setups.
Methods
The overall function of the system
STEP 4
directly affects where and how the
drive should be mounted. Refer to
Install VFD
"Physical Installation" on page 14 for
Hardware
guidelines.
The selected motor application,
STEP 5
along with the control method(s),
determines how the drive should be
Install
connected. Refer to "Electrical
Wiring
Installation" on page 16 for more
information.
The drive can be quickly and easily
programmed for most standard
STEP 6
operations. Refer to "Drive
Configuration" on page 22. Advanced
features or options may require
Program
additional adjustments to achieve the
Parameters
desired performance. Refer to
"Performance Settings" on page 25.
10
Intended Function:
Constant Pressure Water Systems
Pressure Boosting
Type of Automation:
Desired Protection:
System Response
Broken Pipe
Bump Mode
Underload
Steady Flow
Overload
Drawdown
Run/Speed/Stop:
Transducer
Pressure Sensor
Location:
Distance to the Well:
Drive Size:
Inside Clearance Wire Sizes
Drilling Filtering Requirements
Outside
Power Connections:
Conduit Rules:
Grounding
Routing
Inputs
Separation
Outputs
Basic Programming:
I/O Setup:
Application
Motor Ratings Input Functions
Setpoints
Hardware Application:
Submersible
Surface Pump
Single- or Three-Phase
Climate Control:
Temperature
Moisture
Control Circuits:
Feedback Inputs
Other Available Options:
Enable Features