For a USB connection (Windows
A PT-9200DX printer driver can be replaced, added or de-
leted by following the procedure below.
1 Turn off the PT-9200DX, and then disconnect it from
the computer.
2 Insert the P-touch Editor Version 3.1 CD-ROM into
the computer's CD-ROM drive. A dialog box appears,
allowing you to select what to install.
If the dialog box does not automatically appear, click
"My Computer" on the desktop, and then double-
click the CD-ROM drive containing the CD-ROM.
(For Windows
®
XP, click "My Computer" in the Start
menu, and then double-click the CD-ROM drive
containing the CD-ROM.)
Next, double-click "Setup.exe" to display the dialog box.
3 Click the bottom button (Printer driver). A dialog box
appears, allowing you to select the model.
4 Click the icon for the PT-9200DX. The first Driver
Setup dialog box appears, allowing you to select
whether a serial or a USB connection is used.
5 Select "USB cable", and then click the OK button. A
Driver Setup dialog box appears, allowing you to
select whether to replace, add or delete the
PT-9200DX printer driver.
16
®
98/Me/2000 Professional/XP only)
6 Select the desired operation, and then click the Next
button.
If "Replace with new Brother PT-9200DX" is
selected, the previously installed printer driver is
deleted, and replaced with a new one. Select this
option when upgrading the printer driver, or when
running Windows
changing to a PT-9200DX with a different serial
number.
If "Add Brother PT-9200DX" is selected, a new
printer driver is added. With a USB connection on
Windows
®
98/Me, only a port is added without
adding it as a new printer. Select this option when
connecting and using multiple PT-9200DXs with
the same computer.
7 If "Replace with new Brother PT-9200DX" or "Add
Brother PT-9200DX" was selected:
With Windows
®
98/98SE/Me/2000 Professional:
A dialog box appears, instructing you to connect the
PT-9200DX to the computer.
Connect the PT-9200DX to the computer using the
enclosed USB interface cable as described on page 5,
and then turn on the PT-9200DX. A dialog box
appears, showing that the printer driver has been
installed.
Select "Yes, restart immediately.", and then click the
Finish button to restart the computer.
®
2000 Professional/XP and