Publicidad
Idiomas disponibles
Idiomas disponibles
4
2. INTRODUCTION: ABOUT YOUR LIFT
The Oxford/Hoyer Stature is an electrically operated patient lift. Each Stature lift is
fully assembled load tested and certified before being packed/shipped.
The packing consists of a strong, purpose built carton that is used for both export and
domestic markets to ensure the safe arrival of the lift.
A number of documents are supplied in a wallet which is packed with each lift and
should be kept safely for future reference.
USER MANUAL
•
TEST CERTIFICATE
•
PACKING CHECK LIST
•
The TEST CERTIFICATE is an important document and may be required for your insurance
records. It is valid for six months and after it has expired the lift should be inspected
and serviced per the maintenance schedule by a competent authorised engineer.
Servicing and periodic testing can be carried out by your authorised supplier. Please
ensure your lift is included in their maintenance schedule. If you are at all unsure
what your local market servicing requirements are, please check with your dealer
and/or a local government agency.
The Oxford/Hoyer Stature is suitable for the following CATEGORIES of lift within the
working parameters of the lifts specified in the TECHNICAL SPECIFICATIONS (see con-
tents page).
Category A - Wheelchair
Category B - Bed
Category C - Bath (dependent upon setting)
Category D - Toilet/Shower Chair
Category E - Floor
Category F - 90 degree Rotation
The Oxford/Hoyer Stature is suitable for patients in the SITTING, SITTING/RECUMBENT
and RECUMBENT positions. The slings suitable for this device are listed as follows:
Oxford/Hoyer Quick fit sling
•
Oxford/Hoyer Quick fit deluxe sling
•
Oxford/Hoyer Access sling
•
The CE mark:
The Oxford/Hoyer Stature carries the CE mark and complies
with the following EC directives:
• Medical Device Directive (93/42/EEC)
• EMC Directive (89/336/EEC)
• Low Voltage Directive (73/23/EEC)
294000.10017 Rev. B
E n g l i s h
CUSTOMER SATISFACTION CARD (Europe only)
•
DEALER GUARANTEE CARD (Europe only)
•
Oxford/Hoyer Full back sling
•
Oxford/Hoyer Long seat sling
•
Oxford/Hoyer Four point comfort sling & pad
•
E n g l i s h
3. ASSEMBLY AND COMMISSIONING INSTRUCTIONS
CARTON CONTENTS
Place the carton in a clear working area and open carefully. The carton contains:
•
OXFORD/HOYER STATURE LIFT
•
WALLET CONTAINING DOCUMENTS
•
HAND CONTROL
•
BATTERY PACK
•
DESK TOP CHARGER/STAND/LEAD
• FASTENER KIT (INCLUDES SCREWS, ALLEN KEY, HEX SOCKET, CAPPING PLATE)
The Oxford/Hoyer Stature is heavy and will need to be lifted with care.
You may need assistance to lift the Oxford/Hoyer Stature from the carton.
ASSEMBLY INSTRUCTIONS
Remove all the parts from the carton and place on the floor, taking care to protect the
finish from damage.
1.
Place the chassis and mast (which are connected) in a clear space. The mast and
chassis should be rested on the push handle, which will ensure the product remains
stable while connecting the legs and boom to the product.
WARNING
294000.10017 Rev. B
5
Publicidad
Capítulos
