caprari MEC-D Serie Instrucciones De Servicio página 10

MEC-D / MEC-DMR / BHD
1.3 Example of a pump data plate
TYPE Complete code
Rapp. -
3
Q [l/s] [m /h] Flow rate
GB
H max [m] Maximum head
1.4 Example of pump code
Example of pump code: MEC-D 3/80
Single-stage wheel mounted centrifugal pump for tractors
Speciality = no indication
S
Impeller diameter reference
Discharge port diameter
Example of pump code: MEC-DMR 65-2/2
Multistage wheel mounted centrifugal pump for tractors
Specialities = no indication
S
Discharge port diameter
Constructional type reference
Number of stages
Example of pump code: BHD 200
Single-stage wheel mounted centrifugal pump for tractors
Specialities = no indication
S
Discharge port diameter
1.5 Warnings
Become thoroughly familiar with the instructions in the documents supplied with the product. This will enable you to work in complete safety and to
obtain the best performance the product is able to offer.
The following instructions apply to the standard version of the product operating in normal conditions. Special versions, shown by the product code,
may not fully comply with the indications herein (when necessary, the manual will be supplied with additional information).
manufacturer being obliged to give prior notice.
while the manufacturer shall not be held responsible for any consequential damages to persons, animals or property.
ATTENTION - the pump is supplied with no oil. Before starting, pour lubricant into the gearbox (consult paragraph 6.3 "Maintenance" for the
relative procedure);
- never ever allow the pump to operate dry because the sealing system on the shaft is lubricated by the pumped liquid.
10
N°
n [min -1]
H [m]
= various specialities
= various specialities
= various specialities
Revolutions per minute
Rated head
Rotation direction
MEC-D ...
MEC-DMR ...
BHD ...
/80
3
65 -2 /2
200
Caprari S.p.A.