Kit Assembly - Metra 95-6541 Instrucciones De Instalación

KIT PREPARATION
To the 95-6541 radio/climate control panel:
1. Clip in the factory A/C vents. (Figure C)
2. Attach the (4) factory panel clips.
3. Secure the trim panel to the radio
climate/control panel using the
(2) #6 x 3/8" Phillips screws provided.
(Figure D)
Continue to Kit Assembly
(CONT.)
(Figure C)
(Figure D)

KIT ASSEMBLY

ISO DDIN radio provision
1. Attach the radio brackets to the radio
using the screws supplied with the
radio. (Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra. Test
the radio for proper operation.
3. Secure the completed assembly into the
dash using the factory screws.
4. Reassemble the dash in reverse order
of disassembly using the 95-6541 radio
climate/control panel.
(Figure A)
REV. 7/10/2017 INST95-6541
3