Display - Dentsply Maillefer WAVE-ONE Manual De Usuario

6.4.2. Display

After being switched on, all LEDs will light up and a welcome screen will be displayed. On
following uses, it will display the first file in the system last used before switching the device off
or the last file used before switching into standby mode.
Top row: shows either which continuous rotary file system is in use or indicates specifically
that reciprocating mode is selected, e.g. PROTAPER UNIVERSAL or RECIPROCATING.
Bottom row:
1. For continuous rotary systems, 4 columns show system, file, preset torque and speed
values.
2. For reciprocating systems, the display will show the respective reciprocating system in
use.
System
Displays the selected File System (e.g. WAVEONE for WaveOne
Protaper
File Displays the selected file. ALL indicates that all files of the system will be used
with the same settings.
Ncm
Displays the preset torque limit (disabled for reciprocating systems).
Rpm Displays the instrument rotation speed in rpm (revolutions per minute)
(disabled for reciprocating systems).
www.enversaltan.com
Universal, etc.)
®
www.enversaltan.com
, PTU for
™
- 14 /141 -