ABB Orion3 Extended Instrucciones Originales página 7

Functions
Unscrew the cap on top of the active unit to access the dip-switches.
NB: Each function is associated with two different dip-switches: the top and bottom dip-switches must be configured in
the same manner. The "ON" position is the position at delivery.
The dip-switches allows to set the functions as described in the following table:
Dip-switches
1
2
3
4 Reset of the Override
5
6
7
8
*Factory default configuration
Warning! An infinite muting (timeout = ∞) is not compliant with EN 61496-1:2013. Therefore, all possible risks must be
considered and related precautions undertaken before selecting the option "∞".
Warning! The device does not accept configuration changes during normal operation. A change is taken into account
after the next powering of the device. Therefore, the management and the use of the configuration dip-switches
should be performed with great care.
2TLC172298M0201
2015-09-15
Function
Muting timeout
T / X or L-muting
Muting filter
Not used
EDM
Reset
Not used
1
1
ON*
10 min
T / X-muting
Deactivated
Manual
-
Deactivated
Automatic
-
7
2 3 4 5 6 7 8
2 3 4 5 6 7 8
OFF
∞
L-muting
Activated
Automatic
-
Activated
Manual
-
www.abb.com/jokabsafety