Display and diagnostic functions
Display
Display
2TLC172298M0201
2015-09-15
Alignment status
Every couple over the lower light reception threshold
and no couple over the upper light reception
threshold
Every couple over the lower light reception threshold
and one couple over the upper light reception
threshold
Every couple over the upper light reception threshold
Status
Description
Detection zone free.
Interlock
OSSD outputs off.
Beam(s) interrupted.
Interlock
OSSD outputs off.
OSSD ON
OSSD outputs on.
OSSD OFF
OSSD outputs off.
Normal operation
mode,
EDM function activated.
OSSD OFF,
interlock
Normal operation
mode,
EDM function deactivated.
OSSD OFF,
interlock
OSSD OFF,
Override function ready to
interlock
be activated
OSSD error, one or both.
Error mode
OSSD outputs off.
Action
Push the RESET button to return to
OSSD ON.
Remove the object from the detection
zone and push the RESET button.
Activate the Override function
according to paragraph "Override" of
the instruction manual.
Check the wiring and connections of
the OSSD outputs. Make sure that
there is no short-circuit between them
or with the supply voltage.
Then Acknowledge.
If the error persists, contact your
ABB Jokab Safety representative.
10
Alignment quality
Min.
Excellent
www.abb.com/jokabsafety